Skip to content
Energy Basics · Explainer

Power vs. Energy: Load, Demand and Peak Demand

Load is what is drawing power, demand is how much power it draws, and peak demand is the highest point that determines infrastructure size.

Load

A load is anything that consumes electricity: motors, lighting, HVAC, servers, chargers. A site’s total load changes minute by minute as equipment turns on and off.

Demand and peak demand

Demand is the power a load or a whole site draws, usually measured in kW and often averaged over 15- or 30-minute intervals for billing. Peak demand is the highest demand in a period. Electrical infrastructure, from the service entrance to grid transmission, must be sized to serve peaks, even if those peaks occur only a few hours a year.

This is why reducing or shifting peaks can sometimes avoid costly upgrades, and why interval data, rather than monthly totals, is necessary for serious site analysis.

Key terms

Load
Any equipment that consumes electricity, or the total consumption of a site or system.
Demand
The rate at which electricity is used at a given time, typically measured in kW or MW.
Peak demand
The highest demand in a defined period.
Interval data
Meter readings recorded at short intervals, such as every 15 minutes.

Sources & further reading

Research Helper

This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.