Charging levels
Level 1 uses a standard outlet and is slow. Level 2 uses higher-voltage AC circuits and suits workplaces, homes and fleets parked for hours. DC fast charging delivers much higher power and suits short stops, but requires substantially more electrical capacity and cost.
What drives the design
How long vehicles stay parked, how much energy each needs and how many charge at once determine required power. Managed charging can spread demand over time and avoid unnecessary service upgrades. Charger count is not a measure of usefulness; utilization is.
| Type | Power as described by DOE/AFDC | Typical use |
|---|---|---|
| AC Level 1 | 120 V outlet; AFDC range estimates assume about 1.9 kW (roughly 5 miles of range per hour) | Homes and long dwell times where only a 120 V outlet exists |
| AC Level 2 | 208 V (commercial) or 240 V (residential) service; units range from 2.9 to 19.2 kW. Many residential units run at up to 30 A (7.2 kW) on a dedicated 40 A circuit | Homes, workplaces, public and fleet parking for hours |
| DC fast | Typically three-phase AC input; installed outputs up to 500 kW. Vehicle acceptance limits the power actually delivered | Corridors and quick-turnaround fleets |
Key terms
- Managed charging
- Controlling EV charging timing and power to reduce peaks or costs.
- Demand charge
- A billing component based on a customer’s highest measured demand during a period.
- Utilization
- How much of the time equipment is actually used relative to its availability.
Sources & further reading
- U.S. DOE Alternative Fuels Data Center — Developing Infrastructure to Charge Electric Vehicles (charging levels and power)
- U.S. DOE — Procurement and Installation for EV Charging Infrastructure
Research Helper
This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.