Skip to content
How the Grid Works · Infrastructure

What Do Transformers, Switchgear and Substations Do?

Transformers change voltage, switchgear controls and protects circuits, and substations combine both to connect parts of the grid.

Transformers

A transformer changes alternating-current voltage up or down using magnetically coupled windings. Step-up transformers prepare generator output for transmission; step-down transformers bring voltage to levels used by distribution and buildings. Transformer capacity, rated in kVA or MVA, often limits how much new load or generation a site can add.

  1. Generator
  2. Step-up
  3. High-voltage lines
  4. Substation step-down
  5. Feeder
  6. Service transformer
  7. Building switchgear
Voltage changes along the system

Switchgear

Switchgear is the assembly of breakers, switches, fuses and protective relays that lets operators isolate circuits and automatically disconnect faults. Adding solar, storage, generators or large chargers usually requires reviewing whether existing switchgear can safely accommodate them.

Substations

A substation is a facility where transformers and switchgear connect transmission and distribution circuits. New large loads may require a new or expanded substation, which involves utility planning, equipment procurement and construction time.

Key terms

Transformer
Equipment that raises or lowers AC voltage.
Switchgear
Breakers, switches and protective devices that control and isolate electrical circuits.
Substation
A facility with transformers and switchgear connecting parts of the grid.
kVA
Kilovolt-ampere, a unit of apparent power used to rate transformers and other equipment.

Sources & further reading

Research Helper

This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.