Skip to content
Microgrids & Resiliency · Explainer

What Are Behind-the-Meter and Private Power?

Behind-the-meter resources sit on the customer’s side of the utility meter; private power broadly describes energy supplied outside traditional utility service.

Behind the meter

Rooftop solar, a building battery or a standby generator installed on a customer’s property and wiring is behind-the-meter. It primarily affects the customer’s own consumption and bill, though it may still export to the grid or require interconnection approval.

Private power

Private power can include onsite generation owned by the customer or a third party, dedicated supply to a large facility, or co-located generation. Legal, regulatory and utility-territory rules strongly shape what arrangements are allowed, so these require qualified legal and regulatory review.

Key terms

Behind-the-meter
Equipment on the customer’s side of the utility meter, such as rooftop solar or a building battery.
Front-of-the-meter
Resources connected directly to the grid rather than serving a specific customer’s load.
Private power
Electricity supplied outside traditional utility service, such as onsite or dedicated generation.

Sources & further reading

Screening is a starting point, not an engineering approval. Preliminary analysis does not replace onsite inspection, engineering design, utility studies, permitting or bankable feasibility work. Regulated services require appropriately licensed or qualified professionals.

Research Helper

This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.