Core functions
A battery energy storage system charges from the grid or onsite generation and discharges later. Common uses include reducing peak demand, shifting energy from low-price to high-price hours, absorbing solar output, providing grid services and backing up defined critical loads.
- Charge when energy is cheaper or abundant
- Store (with losses)
- Discharge when needed or valuable
Power and duration
Batteries are specified by power (kW or MW) and energy (kWh or MWh). Their ratio sets duration. A system sized for brief peak shaving may be unable to sustain backup through a long outage, and a backup-oriented design may be oversized for peak shaving.
Limits and safety
Round-trip efficiency below 100%, degradation, eventual replacement, thermal management and fire-safety requirements all affect cost and siting. Stacking several value streams is possible only when they do not require the same stored energy at the same time.
Key terms
- Energy storage
- Systems that capture energy for later use, such as batteries or pumped hydro.
- Round-trip efficiency
- Energy recovered from storage divided by energy put in.
- Degradation
- Gradual loss of performance or capacity in equipment such as batteries or solar panels over time.
- Peak shaving
- Reducing the highest demand peaks, often with storage or load control.
Sources & further reading
- U.S. DOE / National Laboratory — Onsite Energy Techno-Economic Analysis Using REopt
- U.S. DOE — Energy Efficiency and Distributed Generation for Resilience
Research Helper
This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.