Skip to content
Wind · Technology Guide

Why Wind Is Highly Site-Specific

Power in the wind rises with the cube of wind speed, so small differences in location and height produce large differences in output.

The cube relationship

The power available in moving air scales with the cube of wind speed. A site with 10% higher average wind speed has roughly 33% more energy available. That makes accurate resource data far more important than for many other technologies.

Terrain, height and turbulence

Wind is slower and more turbulent near the ground and around buildings and trees. Turbines on tall towers in open terrain perform very differently from small turbines mounted near structures, which often underperform expectations. Regional wind maps are a screening tool; serious projects use site measurements or validated modeling.

Variability

Wind output varies across hours and seasons. In parts of Texas, wind is often stronger at night or in different seasons from solar, but complementarity must be shown with time-series data for the specific location.

Key terms

Capacity factor
Actual energy produced over a period divided by what would be produced at full rated output continuously.
Hub height
The height of a wind turbine’s rotor center above the ground.
Curtailment
Reducing a generator’s output below what it could produce, often because of grid constraints or oversupply.

Sources & further reading

Research Helper

This helper answers from Honest Energy’s published research. If the answer is not in our published material, we’ll tell you rather than guess.